ACME ERGO-ACTIVE safety shoes are fitted with a new type of microfibre lining whose capillary action ensures that moisture is considerably better conducted from the inside of the shoe to the outside. The 3D structure of the new textile technology not only has heat- insulating effect, it also acts like a pump when walking. The result is guaranteed high thermal comfort and at the same time high air transmissibility and breath ability.

Footer made with multi protective anti- penetration insole in compliance with the standards EN ISO 20344, 20345, 20346, EN 12568.98. The multi- protective insole guarantees ultra high resistance against penetration of nails or sharp objects.

TECHNICAL INFORMATION

SB or S1 to S5 (safety footwear ) PB or PI to P5 ( Protective footwear) 01 to OS (occupational shoes)
CLASS 1 ot 2	EN 345-1 / EN ISO 20345	EN 346 - 1 / EN ISO 20346	EN 347 - 1 / EN ISO 20347
ALL MATERIALS	SB : basic Properties	PB : basic properties
CLASS 1 ALL MATERIALS EXCEPT FOR NATURAL OR SYNTHETIC	S1 : basic properties plus: -closed back- anti - static - energy absorbing heel	P1 : basic properties plus : - closed back - anti- static - energy absorbing heel	01 : basic properties plus : - closed back - hydrocarbon- resistant sole - anti - static - energy absorbing heel
	S2 : the same as S1 plus : - waterproof	P2 : the same as P1 plus : - waterproof	02 : the same as 01 plus - waterproof
	S3 : the same as S2 Plus : - puncture resistant sole - studded sole	P3 : the same as 02 plus : - puncture resistant sole -studded sole	03 : the same as 02 plus : - puncture resistant sole - studded sole
CLASS 2 NATURAL AND SYNTHTIC POLY-MERS	S4 : basic properties plus : - anti - static - energy absorbing heel	P4 : Basic properties plus : - anti - static - energy absorbing heel	04 : basic properties plus : - anti - static - energy absorbing heel
	S5 : the same as S4 plus : - puncture resistant sole - studded sole	P5 : The same as P4 plus : - puncture resistant sole - studded sole	05 : the same as 04 plus :- puncture resistant sole - studded sole

Symboles for individual specification are defined in the following table
P	Puncture resistant sole		WRU	Water- resistant upper for leather shoes
E	Energy absorbing heel		HRO	Contact heat resistant outsole
C	Electrical resistance, coductivity		ORO	Oil- resistant outsole
A	Electrical resistance, anti- static		WR	Water- resistant sole - upper juncture in leather shoes
HI	Heat- insulated sole		M	Metatarsal impact protection
CI	Sole insulated against cold		CR	Cut - resistant upper

STANDARDS :

EN Specification

EN 344-1 / EN ISO 20344 Standard
This standard defines the overall requirements and methods for safety footwear, protective footwear, and occupational shoes.

It may be used only in conjunction with standards EN 345 -1 / EN ISO 20345, EN346-1 / EN ISO 20346 and EN347 -1 / EN ISO 20347, which specify the requirements for the shoes as a function of specific levels of risk involved.

 

EN345 - 1 / EN ISO 20345
Standard Specification for safety footwear for the workplace. in reference to standard EN 344-1 / EN ISO 20344, this European standard defines the basic and - the additional (optional ) requirements for safety footwear for the workplace, marked s The shoe was designed, and are equipped with safety toe caps designed to woe\withstand a maximum impact of 200 joules and crushing up to 15 KN.

EN 346-1 / EN ISO 20346 Standard
Specification for protective footwear marked P the shoe was designed and are equipped with safety toe caps designed to withstand a maximum impact of 100 joules and crushing up to 10 Kn..

EN 347-1 / EN ISO 20347
Standard Specification for occupational shoes marked 0 These shoes are different from safety / protective footwear in that they have no protective toe cap for impact and crushing.

IS Specification

IS 15298	Safety, Protective & occupational Footwear For Professional Use
IS 15298  part 1	2002 (EN 344)	Requirements & Test methods
IS 15298  part 2	2002( EN 345)	Specification  for safety Footwear
IS 15298  part 3	2002 (EN 346)	Specification for  protective footwear
IS 15298  part 4	2002 (EN 347)	Specification for  occupational footwear
IS 14544 : 1996		Leather safety footwear  having Direct moulded PVC Sole
IS 11226 : 1993		Leather safety footwear having Direct moulded rubber sole

Size Chart